Customise a 3D printed part
Choose a part, set the dimensions for your context, check it in the 3D preview and download a print-ready STL. Models are optimized for 3D printing.
Ensure the part is validated in the local context before printing.
Logistics
1 model
-
Pipe cross clamp, fixed angle
Joins two pipes of different outside diameters (10-60 mm) crossing at a fixed angle (0-90 deg), fitted onto pipes already in place; 4 M6 through-bolts or 4 zip ties; non-clinical use, loads up to 2 kg.
Need a part that is not here?
New models are prepared and validated by the MSF 3D printing advisor, not uploaded directly. If you need a part that is not in this catalogue, or a change to one that is, contact the 3D printing advisor.